AEROMAX 700c Road Comp Black Road Bike Wheelset Clincher Shimano/SRAM 7-10s NEW

AEROMAX 700c Road Comp Black Road Bike Wheelset Clincher Shimano/SRAM 7-10s NEW

$166.57

Category: 700C Aeromax QRx100 mm QRx130 mm Rim Brake Set (Front & Rear) Wheels-Wheelsets Wheels-Wheelsets+Wheels-Wheelsets

Type: Set (Front & Rear)

Vendor: Aeromax

SKU: 344130

Pin It Fancy

Next →

← Previous

AEROMAX 700C ROAD COMP WHEELESET

NEW / HAND-BUILT / SHIPS IN 24hrs

DETAILS:

Wheels come with rim strips and skewers
Serviceable Vuelta Ball Bearing hubs
Hand Built
Every wheel is stressed 3 times
Every spoke is tension tested with a DT Swiss Gauge
These 700c clincher wheels are great for around town, daily training rides or racing.
Comparable wheels sell in bikes shops around the country for $275 to $300

SPECIFICATIONS:

Type-Road
Color: Black
Normal quick release skewered hubs
24 spoke aero double wall alloy rims, machined sidewalls satin finish
Type: Clincher, tubed
Bearing type: Ball/Cone³
Stainless Steel Black aero 3.0mm spokes
Patented spoke pattern
Drilled for Presta valve
Rim Width: 20mm (outer width)
Rim Width: 13.7mm (inner width)
Rim Height: 29.3mm
Spacing: front 100mm, rear 130mm
Weight: Front 1020g / Rear 1190g

COMPATIBILITY NOTES:

Fits 700c tires - from 700 x 18 up to 700 x 42 - the second number is the width, the first refers to the diameter. How wide a tire you can install depends on what type of clearance your frame has between the seat stays and brake arms.
For rim brakes only - does not have mounts for disc brake rotors.
Not intended for use with 27" wheeled frames. They will fit, but 700c wheels are smaller in diameter than 27" and the brake pads will not touch the rim's braking surface. Conversions are possible with brakes with longer reach arms.

Tire Compatibility:	700c Clincher, tubed
Shimano/SRAM Road Cassettes:	7 thru 10 Speed¹
Shimano Mountain Cassettes:	7 thru 11 Speed¹
SRAM Mountain Cassettes:	7 thru 10 Speed¹
Fork Compatibility:	700C, Quick Release (9MM) x 100mm²
Frame compatibility:	700C, Quick Release (10mm) x 130mm²

NOTES:

Does not include adapters, nor is it convertible to any other axle type

Ball / Cone type hubs are the most common type of hub on planet earth. While being nearly indestructable and serviceable, optimal performance requires maintenance. If you're looking for optimizing performance, we advise that the cones are adjusted to your preferences, as well as checking cone position, and re-greasing the bearings throughout the life of the wheel. See the last image for a general diagram of this type of hub. The closer the two cones are on either side of the hub the more restrictive and poor the wheel will spin. The farther the two cones are apart, the better a hub will spin, however, it may introduce play/slop into the bearings if they are too far apart. The perfect position is where the axle turns with the least amount of resistance, and has no extra space between the cones, bearings, and hub races (has no slop or play). The lock nuts on either side of the axle lock the cone's position in place. It is not unique to our brand of wheels, but the design of ball / cone type hubs. Generally, the folks at the factory err on the side of too tight rather than loose because being slightly too tight is better than too loose. Adjustment usually requires one cone wrench (thin wrench), and a standard box/open end wrench for the locknut. There are loads of videos on youtube describing the process.